Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's extremely low power Wi-Fi® network controller ATWINC1500B. It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT.
Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user-programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets. All these features above make this board an ideal choice for the next IoT project.
Features
Nordic Semiconductor nRF52840 SoC
64 MHz Arm® Cortex-M4 with FPU
1 MB Flash + 256 KB RAM
Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary
Arm TrustZone® Cryptocell 310 Security Subsystem
Integrated USB 2.0 Full-speed Controller
QSPI/SPI/TWI/I²S/PDM/QDEC/ADC support
Integrated NFC-A Tag
Microchip ATWINC1500B Wi-Fi Network Controller
Shipped with the latest firmware 19.6.1
IEEE 802.11 b/g/n 20 MHz (1x1) Solution
Extreme low power with Shutdown Control
On-Chip Network Stack to Offload MCU
Supports Soft-AP
Security protocols supported: WPA/WPA2 Personal, TLS/SSL
Enterprise Security with WPA/WPA2 (802.11x)
Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS, MQTT
64Mbit ultra-low-power QSPI Flash Memory
Integrated Li-Po Battery Charger with Power Path Management
Additional NFC-A Tag PCB Antenna
User-programmable RGB LED and Buttons
Dual Wi-Fi/Bluetooth 2.4G Chip Antennas
Reversible USB-C Connector
Li-Po Battery Connector
Easily expandable dual 14-Pin Header Sockets
Measures 2.4" x 1.0" x 0.3" (60.96mm x 25.4mm x 7.6mm)
Hardware Diagram
