Specials ColorFabb

Colorfabb's range of special 3D printing filaments includes materials loaded with metal powder, natural fibers, carbon fibers.

BronzeFill by Colorfabb is a special type of PLA filament infused with bronze powder.

Features

• Material: colorFabb bronzeFill
• Diameter tolerance: ± 0.05 mm
• Density: 3.9 g • cm-3
• Glass transition temperature: 55°C

Tips & Tricks

• Suggested printing temperature: 195-220°C
• Suggested print speed: 40 - 80 mm/s
• Suggested printing surface temperature: (optional) 50-60°C

CopperFill is a special type of PLA filament from Colorfabb which is infused with copper powder.

Features

• Material: colorFabb copperFill
• Diameter tolerance: ± 0.05 mm
• Density: 3.9 g • cm-3
• Glass transition temperature: 55°C

Tips & Tricks

• Suggested printig temperature: 195-220°C
• Suggested print speed: 40 - 80 mm/s
• Suggested printing surface temperature: (optional) 50-60°C

SteelFill is a special type of PLA filament from Colorfabb which is infused with stainless steel powder.

Features

• Material: colorFabb steelFill
• Diameter tolerance: ± 0.05 mm
• Density: 3.13 g • cm-3
• Glass transition temperature: 55°C

Tips & Tricks

• Suggested printing temperature: 195-220°C
• Suggested print speed: 40 - 80 mm/s
• Suggested printing surface temperature: (optional) 50-60°C

WoodFill is a special type of PLA filament from Colorfabb that is infused with very fine wood fibers, which make up about 30% of the total initial blend.

Features

• Material: colorFabb woodFill
• Diameter tolerance: ± 0.05 mm
• Density: 1.15 g • cm-3
• Glass transition temperature: 55°C

Tips & Tricks

• Suggested printing temperature: 195-220°C
• Suggested print speed: 40 - 80 mm/s
• Suggested printing surface temperature: (optional) 50-60°C

CorkFill is a special type of PLA filament from Colorfabb that is infused with very fine cork fibers, which make up about 30% of the total initial blend.

Features

• Material: colorFabb corkFill
• Diameter tolerance: ± 0.05 mm
• Density: 1.18 g • cm-3
• Glass transition temperature: 55°C

Tips & Tricks

• Suggested printing temperature: 210-230°C
• Suggested print speed: 40 - 60 mm/s
• Suggested printing surface temperature: (optional) 50-60°C

GlowFill is a special type of PLA filament from Colorfabb is a glow in the dark thread.

Features

• Material: colorFabb glowFil
• Diameter tolerance: ± 0.05 mm
• Density: 1,210-1,430 gcm-3
• Glass transition temperature: 55°C

Tips & Tricks

• Suggested printing temperature: 195-220°C
• Suggested print speed: 40 - 100 mm/s
• Suggested printing surface temperature: (optional) 50-60°C