Flexible TreeD Filaments

The Flexible Treed Filaments range of 3D printing filaments includes 8 different types of filament.
They are threads made of plastic with rubbery properties of varying degrees.

TreeD Filaments' FLEXABILITY filament is flexible, wear-resistant, has a high resistance to abrasion and scratches.

Features

• Material: TreeD Filaments FLEXABILITY
• Density: 1 g / cm3

Tips & Tricks

• Suggested printing temperature: 230-250 ° C
• Suggested print speed: 30-40mm / s
• Suggested printing bed temperature: 85-100 ° C

TreeD Filaments' FLEXABILITY + filament is flexible, wear-resistant, has a high resistance to abrasion and scratches.

Features

• Material: TreeD Filaments FLEXABILITY +
• Density: 1 g / cm3

Tips & Tricks

• Suggested printing temperature: 230-250 ° C
• Suggested print speed: 30-40mm / s
• Suggested printing bed temperature: 85-100 ° C

Among the flexible threads of TreeD Filaments we also find the FlexMark 7/8/9 filaments are highly resistant to chemical agents, resistant to wear and with a good elastic return.

TreeD Filaments' FlexMark7 filament = 70 Shore A, the most flexible, but requires perfect printer calibration.

Features

• Material: TreeD Filaments FlexMark 7
• Density: 1.2 g / cm3

Tips & Tricks

• Suggested printing temperature: 215-235 ° C
• Suggested print speed: 10-20mm / s
• Suggested print bed temperature: cold to 45

The FlexMark8 filament from TreeD Filaments = 80 Shore A, is a good combination of flexibility and stiffness, easier to print.

Features

• Material: TreeD Filaments FlexMark 8
• Density: 1.22 g / cm3

Tips & Tricks

• Suggested printing temperature: 215-235 ° C
• Suggested print speed: 20-30mm / s
• Suggested print bed temperature: cold to 45

The FlexMark9 filament of TreeD Filaments = 90 Shore A, is the most rigid of all the Flex

Features

• Material: TreeD Filaments FlexMark 9
• Density: 1.24 g / cm3

Tips & Tricks

• Suggested printing temperature: 215-235 ° C
• Suggested print speed: 25-35mm / s
• Suggested print bed temperature: cold to 45

Then we find the Ultraflexx and Ultraflexx + filaments by TreeD Filaments are very easy to print, thanks to their particular formulation, specifically designed for 3d printing.

These filaments find their optimal use in the industrial field, as they have a high resistance to oil aggression, a high elastic return and can be used for extreme performance from -50 ° C to 120 ° C

The Pneumatique filament of TreeD Filaments presents a unique and secret composition.

From a single tire it is possible to obtain enough pellets for the extrusion of 9 pneumatic reels of 500gr each.
TRS wants to reinvent tire recycling by transforming the waste tire into a precious and sustainable resource.