3DLAC PLUS - 3D Printing Platen Adhesive - with Nebulizer

3DLAC Plus is a thermoplastic copolymer based lacquer, suitable for FFF or FDM 3D printing.
3DLAC Plus is the latest advancement in 3DLAC research and development.
Like 3DLAC, 3DLAC Plus with a light mist on the surface is sufficient to completely hold the first layer to the base, but with less product and more fixation.
In addition, this format allows you to take 3DLAC PLUS anywhere.
It can be used for printers with a heated platen as well as those without.

FEATURES
Ultra-fast drying
Focused Diffusion
High durability (over 100 uses)
Easy application
Water cleaning
Good anti-warping performance with various materials such as ABS, PLA, PETG ...
Adhesion on any surface
Intelligent fixing properties
Product recognized by the Spanish Toxicological Institute

APPLICATIONS
3DLAC can be applied to a multitude of materials, on which you want to print with 3D printers. Depending on the material, different adhesions can be obtained. It is recommended to do some testing before printing large parts with certain technical materials. A larger amount of spray helps make the adhesion stronger. When removing parts, pay special attention to how you do it, it is recommended to let the surface cool and, if necessary, give the part a light tap to loosen it easily.

INSTRUCTIONS FOR USE
Shake the spray before use, for about one minute.
Apply to clean, dry surfaces. Recommended for glass, mirrors, aluminum and any smooth surface. On plastic surfaces, it is recommended to test the behavior of the product first.
Apply a thin layer for best results.
Turn sprayer upside down to purge valve after use.
If the sprayer is clogged, use a cotton swab to apply a small amount of alcohol to the nozzle.
Always use in ventilated areas.
Avoid applying to electronic devices.
After use, clean the speaker to keep it in good condition and prevent clogging.
Avoid use by children.

PHYSICAL CHARACTERISTICS
Type of binder: Thermoplastic
Color: Transparent
Glossiness (ASTM D-523 ISO 2813): Not applicable
Dry to touch ( ASTM D-1640 ISO 1517 ): 15''
Total Dryness (ASTM D-1640 ISO 1517): 1''
Dry film thickness (ASTM D-823 ISO 2808): 15 µ/layer
Adhesion ( ASTM D-3359 ISO 2409 ): 4 B
Theoretical coverage (sprayed on pressures): 1 m²
Thinner: Isopropyl alcohol
Product life: >5 years
Overlap: Yes
Heat resistance: 200ºC
Application conditions: Minimum ambient T.: 8ºC / Surface T. from 5ºC to 180ºC / Maximum humidity 85% R.H.P.

PACKAGING
Nominal capacity 100ml
Container Heat Resistance: <50ºC