Flexible

The range of filaments for 3D printing Flexibledi Treed Filaments includes 8 different types of filament. These are filaments consisting of plastics with various degrees of rubbery properties.

The FLEXABILITY filament from TreeD Filaments is flexible, wear resistant, has high abrasion and scratch resistance.

Features

• Material: TreeD Filaments FLEXABILITY
• Density: 1 g/cm3

Tips & Tricks

• Suggested printing temperature: 230-250 °C
• Suggestedprinting speed: 30-40 mm/s
• Suggestedprint bed temperature: 85-100 °C

The FLEXABILITY+ filament from TreeD Filaments is flexible, wear-resistant, has a high resistance to abrasion and scratches.

Features

• Material: TreeD Filaments FLEXABILITY+
• Density: 1 g/cm3

Tips & Tricks

• Suggested printing temperature: 230-250 °C
• Suggestedprinting speed: 30-40 mm/s
• Suggestedprinting surface temperature: 85-100 °C

Among the flexible filaments of TreeD Filaments we find FlexMark 7/8/9 filaments are highly resistant to chemicals, wear resistant and with a good elastic return.

The FlexMark7 filament from TreeD Filaments = 70 Shore A is the most flexible, but requires perfect printer calibration.

Features

• Material: TreeD Filaments FlexMark 7
• Density: 1.2 g/cm3

Tips & Tricks

• Suggested printing temperature: 215-235°C
• Suggestedprinting speed: 10-20 mm/s
• Suggestedprinting surface temperature: cold to 45

The FlexMark8 filament of TreeD Filaments = 80 Shore A, is a good combination of flexibility and rigidity, easier to print.

Features

• Material: TreeD Filaments FlexMark 8
• Density: 1.22 g/cm3

Tips & Tricks

• Suggested Printing Temperature: 215-235°C
• Suggestedprinting speed: 20-30 mm/s
• Suggestedprint bed temperature: cold to 45

The FlexMark9 filament of TreeD Filaments = 90 Shore A, is the most rigid of all Flexes.

Features

• Material: TreeD Filaments FlexMark 9
• Density: 1,24 g/cm3

Tips & Tricks

• Suggested Printing Temperature: 215-235°C
• Suggestedprinting speed: 25-35 mm/s
• Suggestedprinting surface temperature: cold to 45

Then we find the Ultraflexx and Ultraflexx+ filaments by TreeD Filaments are very easy to print, thanks to their particular formulation, specifically designed for 3d printing.

These filaments find their optimal use in the industrial field, since they have a high resistance to oil aggression, a high elastic return and can be used for extreme performances from -50°C to 120°C.

The Pneumatique filament from TreeD Filaments features a unique and secret composition.

From a single pneumatic it is possible to obtain enough pellets for the extrusion of 9 pneumatic reels of 500gr each.
TRS wants to reinvent tire recycling by transforming waste tire into a valuable and sustainable resource.