These are nozzles for high flow applications. They are manufactured in-house by Bondtech, and fit the following blocks/printers:
E3D Volcano blocks / Other Volcano type blocks / Artillery Sidewinder X1 and X2 / Anycubic Vyper / FLSUN Super Racer / Artillery Genius Pro / Anycubic Kobra and Kobra Max / Lulzbot TAZ MOARstruder / Other?
Features
1 unit per package;
Available sizes: 0.40, 0.60, 0.80, 1.0 and 1.2 mm;
Optimized for 1.75 mm filament;
Compatible with 2.85 mm filament.
Requires 6 mm wrench
Main benefits of Bondtech CHT® Vol
Increased melt capacity due to increased heating wall surface area
Increased flow rate by about 50%.
Competitive price/performance
Ultra-precise machining
Brass nozzle with nickel-coated surface
Follows the nozzle standard:
Volcano (M6×1×14.5×21)
Can be used with 1.75 or 2.85 mm hotend.
Flow rate gains may vary. Results depend on the hardware, materials and print settings used.
Advantages of Bondtech CHT® technology:
The Bondtech CHT® nozzles split the filament into 3 thinner filaments, allowing the material to melt from the inside. In this way, the material melts faster and higher flow rates can be used.
Benefits of nickel coating
A nickel coating is applied to coated brass nozzles to provide protection against corrosion, erosion and abrasion. Nickel-coated nozzles have greater corrosion resistance and a lower coefficient of friction, which allows for smoother feeding of material and delays adhesion of plastic to the nozzle surface.
Recommended Materials
Use this nozzle with the following materials: PLA / ABS / HIPS / PC / TPU / TPE / Nylon / PETG / ASA / PP / PVA
For technical and abrasive materials, we recommend using other nozzles from our range.
Different sets of nozzles for different materials
We recommend having different sets of nozzles because:
Using different materials with the same nozzles causes deposits to form inside the nozzle.
These deposits cause clogging.
We recommend changing nozzles when changing materials.
