Seeeduino LoRaWAN is an Arduino development board with LoRaWan protocol embeded, through which you can get started quickly to experience LoRa's advantage in the field of IoT.
Based on communication module RHF76-052AM, Seeeduino LoRaWAN is compatible with LoRaWAN Class A/C and supports a variety of communication frequencies. The 4 onboard standard grove connectors allow Seeeduino LoRaWan to connect with hundreds of grove sensors and actuators for Seeeduino conveniently, as a result, users are able to be more focus on the application itself without worrying about the compatibility issue between different modules.
In addition, the board has embeded an integrated lithium battery management chip that allows the board to be charged by USB interface. In low consumption mold, a full charged lithium battery can power the board for several months. By using Seeeduino LoRaWAN. You can build an IoT application very quickly.
We also offer another version with GPS module embeded, click here to find the Seeeduino LoRaWAN W/GPS.
Note:
Please update the firmware when the first time to use it. Please always plug 3.7V Lipo battery in case USB power supply is not sufficient.
Features
LoRaWAN Class A/C
Ultra long range communication
Ultra low power consumption
Minimum current (3.7V lipo battery) - 2mA
Minimum current (3.7V lipo battery & remove PWR LED) - 80 uA
Arduino/Processor
ATSAMD21G18 @ 48MHz with 3.3V logic/power
Arduino compatible (based on Arduino Zero bootloader)
Embedded with lithium battery management chip and status indicator led
20 GPIOs
4 on-board Grove connectors
18 x PWM pins
6 x analog inputs
1 x analog output (A0)
3.3V regulator with 200mA output
Reset button
LoRaWAN/RHF76-052
1.45uA sleep current in WOR mode (Spec of the modules, not the board)
High link budget of 160dB. -140dBm sensitivity and 19dBm Output power.
Dual band, 434/470MHz and 868/915MHz
19dBm@434MHz/470MHz
14dBm@868MHz/915MHz
Support LoRaWAN protocol, Class A/C
Ultra long range communication
Ultra low power consumption
Firmware upgrade
Small size: 23mm X 28mm with 33 pin SMT package
