Phrozen TR250LV is an excellent resin for engineering parts and thermoforming (dental) applications that need to absorb some heat. It can withstand temperatures in excess of 150°C. Perfect resin for Phrozen Transform.
Features Phrozen TR250LV:
Contents: 5KG
XY planar resolution: 47 microns
Z resolution (level height): 30-100um
Normal level time: 15 sec @ 50 um
Properties: High hardness, toughness and resolution.
Way to rinse: clean with alcohol spray with air gun
Suitable for: LCD 3D printer
Application: rubber mold for jewelry, GK kit for fine details, heat resistance application
Color: gray
Low viscosity
Heat resistant up to 150°C
Specifications:
Viscosity: 230 cps
Density: 1.10 g/cm3
Tensile stress (breakage): 68 Mpa
Tensile modulus: 1050 Mpa
Hardness: Shore 79D
Elongation: 20 %
Impact I-Zod: 6.31 KJ/m2
Heat deflection temperature @0.45MPa: > 150°C
Instructions for use:
We suggest using the resin and printer indoors under ventilated conditions.
Avoid exposure to sunlight and indoor luminescence.
Please store resin in a closed opaque bottle to avoid exposure to air.
Do not mix used and unused resin together.
Please keep resin away from children.
Do not discharge the resin. Please cure the resin and treat/recycle it as general plastic garbage.
Safety rules:
Do not eat or swallow the resin. Go to the hospital if necessary.
Wear goggles to avoid eye contact with resin. Wash your eyes with water and go to the hospital if necessary.
Resin may cause mild skin irritation. Wear gloves when handling. Stop using if an allergy has occurred.
The resin has a slight odor. We strongly advise you to use it in ventilated conditions.
Recommended safety equipment: gloves, mask, goggles and lab coat.
Store the resin at room temperature (15 ? 35°C) and in dry conditions.
