PEI surface plate with both sides smooth - printers Voron
The flexible platen system DHM-pro is a printplate upgrade for your 3D printer Voron. With different sizes available (250x250mm - 300x300mm - 350x350mm), it can be used on many printers beyond Voron.
With a PEI surface coating, it offers better adhesion and easier removal of the printed model.
It allows a two-layer system to be created in conjunction with the dedicated magnetic platen. It is easy to install and provides strong adhesion to many materials.
The plate features two smooth sides. It can be used as a printing plate on both sides.
It is a flexible harmonic steel plate, which does not deform when bent. In fact, when bending is reduced, the plate returns to its original state (if the yield point is not exceeded).
After printing and cooling of the heated plate to room temperature, therefore, the flexible construction board can be detached from the magnetic base. The printed model can then be more easily removed by gently bending the plane.
The PEI coating is heat-resistant up to 200°C.
During printing, the coating on the printing surface ensures excellent adhesion.
This type of platen is best for printing PLA and has excellent adhesion with almost all materials. The bottom of your prints if you use the smooth surface will be smooth.
Key features
- Printing plate: smooth PEI
- Excellent adhesion
- Many compatible materials: suitable for PLA, ABS, TPU and PETG
- Sizes: various models available
- Quick and easy installation: the steel plate is placed over the magnetic plate and remains fixed to
- Uniform heat transfer
- Maximum temperature of the heating bed: 120-130 °C
Advantages:
- Can be printed on both sides
- More adaptive Z adjustment
- Prints come off automatically as soon as the bed cools down
Disadvantages:
- PLA prints with small contact areas may require a brim
- PLA prints with a large contact area may warp
Usage temperatures:
- PLA: 40°c - 60°c (60°c is recommended for objects with a large base)
- PETG: 75°C - 85°C
- ABS: 90°C - 100°C
Notes:
To ensure a longer shelf life and avoid damage to the prints, we recommend waiting for both the shelf and the printed object to cool down by reaching room temperature.
The PEI top can be cleaned using 90% isopropyl alcohol (IPA).
Caution.
Never use acetone to clean the flexible steel plate coated with PEI! In fact, acetone creates micro-fractures in the PEI coating, which leads to deterioration of the surface over time.
Do not wash the PEI plate with water. Wait for the platen to cool before removing it from the printer and bending it to remove the printed piece. We do not recommend using tools to remove printed pieces. For example, avoid using spatulas that can damage the surface of the platen.
Package contains:
1 x Plate with smooth PEI surface on both sides (size according to selected variant)
Magnetic sheet for fixing is to be purchased separately.
