The Hot Block Hardware kit from Slice Engineering consists of all the components needed to mount the block on the heat sink of thehotend.
Two versions are available:
- Standard / Magnum / Liquid
- Magnum+
Package contains: 1 x Hot Block Hardware - Slice Engineering
Specifically:
The Standard / Magnum / Liquid version includes:
4 x Spacers to separate the block from the heat sink (or liquid base)
2 x Cylinder head M1.4 screws with threadlocker to secure the block to the heat sink (or liquid base)
2 x M3 cap screws to hold the cartridge and temperature sensor inside the block
Magnum+ version includes:
4 x Spacers to separate the block from the heat sink (or liquid base)
2 x M1.6 cap screws and serrated lock washers to secure the block to the heat sink (or liquid base)
6 x Cylinder head screws M2.5 (length 4) to hold the cartridges and temperature sensors inside the block
1 x M2.5 cap screw (length 8) to cover the hole otherwise used for the optional nozzle insulator
The variant chosen when ordering will be provided.
