Phrozen Model Aqua Green is an excellent low cost UV resin compatible with most popular LCD 3D printers.
Features Phrozen Model Aqua Green:
Low shrinkage and high precision: Phrozen Aqua-Green is developed for low shrinkage and high precision printing. Its low deformation and dimensional stability are especially good for precise parts.
Low viscosity and odor: Phrozen Aqua-Green is easy to print and rework due to its low viscosity. Meanwhile, its low odor will not make your place smell bad.
Fast printing: Phrozen Aqua-Green is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle and 1.5 sec on Sonic (50µm).
Wide application: the printed parts have good hardness and toughness. It is perfect not only for models but for product prototyping.
Specifications:
Weight: 500g bottle
XY resolution: ~50µm
Recommended layer height: 30-100 um
Ways to rinse: clean with alcohol spray with air gun. DO NOT immerse the model in alcohol for a long time.
Instructions for use:
Use resin and printer in a well-ventilated room
Avoid exposure to sunlight and indoor lights
Please store resin in a closed opaque bottle to avoid exposure to air.
Do not mix used and unused resin together.
Please keep resin away from children.
Do not discharge the resin. Please cure the resin and treat/recycle it as general plastic garbage.
Safety Rules
Use in a well-ventilated room.
Recommended safety equipment: gloves, mask, goggles and lab coat.
Store resin at room temperature (15 ? 35°C) and in dry conditions.
