Phrozen SC-801 Clear Resin is an excellent resin for transparent prints. With proper post-processing you can have crystal clear results.
Post-processing notes:
The finished print will be slightly whitish instead of transparent. It requires proper post-processing to achieve crystal clear transparency. Here are some tips:
After cleaning with alcohol, keep in mind that your prints will even turn whitish. This is a general case.
To avoid yellowing after post-print curing, use a gentle UV lamp to cure the model. E.g. 35 W lamp / 405 nm
To achieve a highly transparent model, you need to eliminate surface roughness and layer mark, e.g. polish the model with sandpaper and use a transparent paint spray (not yellowish / glossy).
Specifications
Weight: 1kg per bottle
XY Resolution: 0.075mm
Level Height / Parameter: 20 sec @ 50 um (Phrozen Shuffle / Make ParaLED)
Key Performance: Highly transparent resin. Not easy to yellow in post-polymerization. It is recommended to use a low-power UV curing light to perform post-print curing.
Ways to clean the molded part: use alcohol spray to clean the models and dry them with an air gun. Do not soak the printed part in alcohol for more than 30 seconds.
Compatible printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED.
Application: optical part, transparent models.
Instructions for use
We suggest to use the resin and the printer indoors in ventilated conditions.
Avoid exposure to sunlight and indoor luminescence.
Please store resin in a closed opaque bottle to avoid exposure to air.
Do not mix used and unused resin together.
Please keep resin away from children.
Do not discharge the resin. Please cure the resin and treat/recycle it as general plastic garbage.
Safety Rules
Do not eat or swallow the resin. Go to the hospital if necessary.
Wear goggles to avoid eye contact with resin. Wash your eyes with water and go to the hospital if necessary.
Resin may cause mild skin irritation. Wear gloves when handling. Stop using if an allergy has occurred.
The resin has a slight odor. We strongly advise you to use it in ventilated conditions.
Recommended safety equipment: gloves, mask, goggles and lab coat.
Store the resin at room temperature (15 ? 35°C) and in dry conditions.
This is not a biocompatible resin. Please DO NOT use this material for medical applications.
