Phrozen Resin ABS like Gray (5KG)

Phrozen Resin ABS is an excellent resin for highly detailed prints. The light gray matte color is perfect for display, post processing and painting. Perfect, easy-to-use resin for Phrozen Transform.
Features Phrozen Resin ABS:
Volume: 5 kg container
XY planar resolution: 50 microns
Z resolution (level height): 30-100 microns
Properties: High hardness, toughness and resolution.
Ways to rinse: clean with alcohol spray with air gun
Suitable for: LCD 3D printer
Application: general modeling and prototyping
Viscosity: 67 cps
Density: 1.10 g/cm3
Tg: 70 degrees Celsius
Tensile strength: 10 Mpa
Tensile modulus: 1050 Mpa
Hardness: Shore 76D
Elongation: 3 %
I-Zod impact: 1.44 KJ/m2
Instructions for use:
We suggest to use the resin and the printer indoors in ventilated conditions.
Avoid exposure to sunlight and indoor luminescence.
Please store resin in a closed opaque bottle to avoid exposure to air.
Do not mix used and unused resin together.
Please keep resin away from children.
Do not discharge the resin. Please cure the resin and treat/recycle it as general plastic garbage.
Safety rules:
Do not eat or swallow the resin. Go to the hospital if necessary.
Wear goggles to avoid eye contact with resin. Wash your eyes with water and go to the hospital if necessary.
Resin may cause mild skin irritation. Wear gloves when handling. Stop using if an allergy has occurred.
The resin has a slight odor. We strongly advise you to use it in ventilated conditions.
Recommended safety equipment: gloves, mask, goggles and lab coat.
Store the resin at room temperature (15 ? 35°C) and in dry conditions.