Phrozen Water Washable Rapid Resin Black (1KG)

Water-washable: unlike standard resin, Phrozen water-washable resin can be cleaned with regular water, no need for IPA
Low viscosity: Phrozen water-washable resin is easy to print and process due to its low viscosity
Low odor: more pleasant to use in an office or home environment
Fast printing: Phrozen water-washable resin is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle and 1.5 sec on Sonic (50µm)
Durable and not brittle: typical water washable resin is brittle, but not the water washable resins of Phrozen. Parts molded with Phrozen water washable resin have good hardness and toughness. It is perfect for modeling, prototyping and more
Features:
Contents: 1KG
XY planar resolution: 47 micron
Z resolution (level height): 30-100um
Normal level time: Shuffle: 7 sec at 50 um, Sonic 1.5 sec at 50 um
Properties: High hardness, toughness and resolution.
Ways to rinse: clean with alcohol spray with air gun
Suitable for: LCD 3D printer 405 nm UV
Application: durable and not brittle
Color: black
Viscosity: Low
Odor: Low
Specifications:
Viscosity: 149 cps
Density: 1.05 g/cm3
Tg: 87C
Tensile stress (breakage): 21 Mpa
Hardness: Shore 80D
Elongation: 14 %
Impact I-Zod: 1.52 KJ/m2
How to use
DO NOT rinse molded items under the tap
Water-washable UV resin is just as dangerous as regular UV resins
Please make sure these chemicals do not enter the environment
Always wear personal protection (gloves, goggles) when handling the resin
Printed objects washable in clean water in one or two steps
Use tubs/containers filled with water

Air dry
DO NOT dispose of waste water without post-processingprocessing
1) Treat resin-contaminated wastewater with a UV lamp or sunlight
2) Filter solid resin particles from wastewater
3) Dispose of wastewater
4) Remaining filtered particles should be treated and recycled as plastic waste
Please store our resin in an closed opaque bottle to avoid exposure to air
Do not mix used and unused resin together
Notes and Warnings
WARNING Water-washable UV resins are hazardous chemicals just like regular UV resins
DO NOT rinse printed objects under the tap
DO NOT throw away rinse water without post-processingprocessing
DO NOT allow these chemicals to enter our environment
Always wear personal protection (gloves, goggles) when handling resin
Use your resin 3D printer in well-ventilated circumstances
Recommended safety equipment: gloves, mask, goggles, and lab coat
Do not expose UV resin to sunlight or UV-containing indoor light
If UV resin is consumed, consult a physician
In case resin comes in contact with your eyes, wash your eyes with water and consult a physician
Resin can cause skin irritation, always wear gloves when handling
Please keep UV resin away from children
Store resin at room temperature (15 ? 35°C) and in dry conditions.