Hello. 3dlac-spray,...do i have to spray it onto the cold build plate before the print or do i heat up the bed and spray it onto the hod bed and start the print.
Hello, here is the procedure:
- Shake well for 1 min before use.
- Apply to clean, dry, cold surfaces (glass, mirrors, aluminum, smooth surfaces). Test on plastic first.
- Use a thin layer for best results.
- After use, turn diffuser upside down to purge valve.
- If clogged, clean nozzle with alcohol using a cotton swab.
- Use in ventilated areas. Avoid electronics.
- Clean the speaker after use to prevent clogging.
- Place the plate on the printer and start printing.