Introduction?
eNet-ZBP113 ZigBee module is a 2.4-GHz, IEEE 802.15.4/ZigBee embedded wireless module built in TICC2530, designed by BestU. eNet-ZBP113 module works on global ISM 2.4GHz toll free frequency band with traffic rate reaching 250kb, which can be divided 16 channels.This module is compatible with Raspberry Pi Model B and B+ and Beaglebone Black.
Self-network, LAPU are the main features of eNet-ZBP113 module. It is not necessary for you to understand complex ZigBee Protocol. All the processing part of ZigBee Protocol can be done internally under eNet-ZBP113 module, what you only need to do is to transport data by serial port, which can shorten product lead time tremendously. Meanwhile has the advantage of low-power and low-cost. As a consequence, eNet-ZBP113 module is the best choice of remote monitoring application, such as Smart Home controlling, Smart Grid data collection, industrial automation control and security monitoring and etc.
Features?
Typical DC Character (VDD = 3.3V @ + 25?)
mA (TXD)
120mA (Max)
mA (RXD)
40mA (Max)
mA (Standby)
35mA (Max)
Typical RF Character
Frequency Range
2.405GHz ? 2.480Ghz
RF Channel Number
16
Transfer Rate
250 Kbps
Rx Sensitivity
-97dBm
TX Power
10-20 dBm
Outout Impedance
50 ohm
Typical Networking Character
Wireless Protocol
ZigBee 2007
Largest Network Node
65535 (Max)
Configured Node
Coordinator / Router
Maximum Transmission Distance
1600 meter
Network Topology
Mesh Network (MESH)
Specification?
Package List:
eNet-ZBP113 module x 1
2.4G Antenna x 1
Documents:
Getting Start
User Manual
If you have any technical problem, please contact support [at] bestni.com
