ReForm rPLA - Caramel - Formfutura

Unique features - 100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA Less environmental impact by quality controlling and re-using extrusion waste streams Only residual waste streams of EasyFil PLA is being re-used, thus pure quality! - Sustainable packaging ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools ReForm filament is packaged in recycled carton boxes - Biodegradable - Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces General printing guidelines * Nozzle size: ? 0.15mm Layer height: ? 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ?: 1.24 g/cc 50 gr coil 1 Kg spool Ø 1.75mm ± 16.8m ± 335m Ø 2.85mm ± 6.3m ± 126m